Faulty Oven? How to Spot the Problem and Get It Fixed Fast

Ever opened the oven door only to find it staying cold? A faulty oven can ruin dinner plans and spike your electricity bill. Before you panic or order take‑out, take a few minutes to figure out what’s really going on. Below are the most common reasons ovens quit, simple checks you can do at home, and clear signs that it’s time to call a professional.

Common Reasons Your Oven Stops Heating

Both electric and gas ovens share a few trouble spots. The heating element (the metal coil you see at the bottom) can burn out after years of use. If the element looks darkened or broken, it’s probably the culprit.

Gas ovens rely on an igniter. A weak or cracked igniter won’t spark, so the burner stays cold. You might hear a clicking sound but no flame.

The oven’s temperature sensor or thermostat can go bad, sending the wrong signals to the control board. When this happens the oven may think it’s already at the right temperature and stop heating.

Fuses and relays protect the oven’s circuits. A blown fuse or a faulty relay will cut power to the heating element or igniter. Check your appliance’s manual for the exact location of these parts.

Finally, the control board itself can fail. A bad board can give you error codes, refuse to start, or stop heating mid‑cycle. This is usually the hardest DIY fix and often needs a pro.

DIY Checks Before Calling a Technician

Start with the easy stuff. Unplug the oven for a minute, then plug it back in. A quick reset can clear minor glitches, especially on newer digital models.

Next, inspect the heating element for visible damage. If you see a break or blister, replace it. Replacement parts are inexpensive and many tutorials show you how to remove the element in under 30 minutes.

For gas ovens, look at the igniter glow when you turn the oven on. No glow? The igniter likely needs swapping. You can test it with a multimeter—if you’re comfortable with basic electrical tools.

Check the oven’s fuse. Most ovens have a replaceable fuse in the back panel or behind the control knob. A blown fuse is a thin, broken wire inside a glass tube; replace it with the same amp rating.

If you’ve gone through these steps and the oven still won’t heat, it’s probably a sensor, thermostat, or control board issue. These parts require precise calibration and sometimes re‑programming, which is best left to a certified technician.

When you do call a repair service, ask about their experience with both electric and gas models, and if they provide a warranty on parts and labor. A reputable shop like Mumbai Laptop Repair Service Hub also handles appliance repairs, offering quick turnaround and transparent pricing.

Repair costs vary. Replacing an element or igniter usually runs between ₹1,500‑₹3,000. Sensors and thermostats are about ₹2,000‑₹4,000. A full control board replacement can cost ₹5,000‑₹8,000, depending on the brand. Always get a written estimate before authorizing work.

In short, a faulty oven isn’t always a disaster. Simple visual checks and a quick reset solve many issues. If you hit a wall, know the typical cost ranges and pick a trusted service provider. With the right approach, your oven will be back to baking, broiling, and roasting in no time.