Electric Oven Repair Guide – What’s Wrong, How to Fix, and What It Costs

If your electric oven suddenly quits, you’re not alone. Most homeowners face a dead oven at some point, and the good news is many fixes are simple enough to try before calling a technician. Below we break down the most common reasons an electric oven stops working, give you step‑by‑step troubleshooting tips, and share a quick look at repair costs in Mumbai.

Top Reasons an Electric Oven Won’t Heat

First, locate the symptom. Does the oven turn on but stay cool? Do the lights work while the heating elements stay dead? Those clues point to different culprits.

1. Blown fuse or tripped circuit breaker – Power issues are the easiest to overlook. Check your home’s fuse box; a blown fuse or tripped breaker will stop electricity from reaching the oven.

2. Faulty heating element – Most ovens have a bake element (bottom) and a broil element (top). If one is broken, the oven may still light up but won’t get hot. Look for visible cracks or discoloration.

3. Bad oven thermostat or temperature sensor – The thermostat tells the oven when to stop heating. A malfunctioning sensor can keep the oven from reaching the set temperature.

4. Loose or damaged wiring – Over time, wires can loosen inside the oven cavity or the control board. A quick visual inspection (after unplugging) can reveal frayed or burnt wires.

5. Faulty control board – Modern ovens use electronic boards to manage heating cycles. A damaged board may prevent the oven from receiving the right signals.

DIY Troubleshooting Steps

Before you call a pro, run through these quick checks. Always unplug the oven or switch off the breaker to stay safe.

Step 1: Verify power – Reset the breaker or replace a fuse. If the oven’s display lights up, power is fine.

Step 2: Test the heating elements – Use a multimeter. Set it to “ohms” and touch the probes to the element’s terminals. A reading of 0 or infinite resistance means the element is bad and needs replacement.

Step 3: Inspect the thermostat/sensor – Locate the sensor (usually a thin metal rod in the oven cavity). Test it with a multimeter; it should show around 1100 Ω at room temperature. If it’s far off, swap it out.

Step 4: Look for loose wires – Open the back panel, check all connections, and tighten any loose screws.

Step 5: Call a professional – If the control board or complex electronics seem faulty, it’s safer to let a certified technician handle it.

What Does Repair Cost Look Like in Mumbai?

Costs vary by part and labor, but here’s a rough range:

• Heating element replacement: ₹1,200 – ₹2,500
• Thermostat or sensor swap: ₹800 – ₹1,500
• Control board repair: ₹2,500 – ₹4,500
• Labor charges (hourly): ₹500 – ₹800

If the problem is a simple fuse or a loose wire, you might spend under ₹500. For major board failures, expect a higher bill. Ask any Mumbai‑based service for a written estimate before they start work.

Remember, regular maintenance can keep repair bills low. Keep the oven clean, avoid spillage on heating elements, and run a quick self‑test every few months.

By spotting the common issues early and trying the easy fixes, you can often save time and money. When in doubt, the experts at Mumbai Laptop Repair Service Hub are ready to help with fast, reliable oven repairs that get your kitchen back in shape.

Got a stubborn oven that still won’t heat after these steps? Drop a comment or give us a call – we’ll walk you through the next move.